See page 18. 2. Perform the pre-ride inspection. Page 19: Eye Protection Eye Protection Do not depend on eyeglasses or sunglasses for eye protection. Page 81: Radiator Coolant Cooling System Radiator Coolant Escaping steam can cause severe burns. Page 46: Diagnostic Mode Instrument Cluster Rider Information Center Diagnostic Mode The diagnostic mode is for informational purposes only.
Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label. When removing the battery, always disconnect the negative (black) cable first. Maintenance Interval (whichever comes first) Miles (Km) 25 H… Page 70 Idle speed Toe adjustment Headlight aim Perform these procedures more often for vehicles subjected to severe use. » E Emission Control System Service (California) Have an authorized Polaris dealer perform these services. Failure to check or maintain proper operation of the throttle system can result in an accident if the throttle lever sticks during operation.
After any overturn or accident, have a qualified service dealer inspect the entire machine for possible damage, including (but not limited to) brakes, throttle and steering systems. Page 117 Exported Vehicles How to Get Service If Purchased From A Private Party: If you purchase a Polaris product from a private citizen outside of the country in which the vehicle was originally purchased, all warranty coverage will be denied. Using an oil filter wrench, turn the filter counterclockwise to remove it. 10. Clean the filter sealing area on the crankcase. 11. Lubricate the filter o-ring. Always operate the engine long enough to reach operating temperature, which reduces condensation. Steering Assembly The steering assembly of the ATV should be checked periodically for loose nuts and bolts. If loose nuts and bolts are found, see your Polaris dealer for service before operating the vehicle. Polaris also gives a one year limited warranty on the final drive chain for failure due to defects.